Can be used to store sample tubes, cryo tubes, and vials in freezers (-80°C, -20°C), fridges or at room temperature
Accommodates 2 mL snap-on tubes, 2 mL screw-cap tubes, 1.5 mL snap-on tubes, 1.5 mL screw-cap tubes and 2 mL cryogenic tubes
NOT autoclavable

Microtube rack holds 0.2mL tubes on one side (60 wells- 15 x 4) and 1.5mL to 2mL tubes on the other (80 wells- 16 x 5)
Polypropylene material

20% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
Per 125 Strips with Caps
For individually attached cap on tube, or 8-strip caps either flat top or domed
0.2mL Volume and natural (colorless) options are available
*0.1mL and white options are not available
SELECTION GUIDE : 8-strip PCR TUBES
White vs. Clear :
White
Direct significantly more signal back to the qPCR instrument's detector compared to traditional clear plates (the improved signal reflection ensures that even the lowest levels of fluorescence are detected)
The white well walls stop the signal from passing thro µgh to the cycler block, where it can be inconsistently reflected or absorbed, leading to increased noise levels in detected fluorescence. This keeps variations in the cycler block from affecting qPCR data
Our white PCR plastics increases sensitivity, reduces variability and increases the signal-to-noise ratio within the qPCR assay
Clear
Allows to verify pipetting steps right after each pipetting action, as you can see the reagent added into the well as you intended
Suitable for most applications

Standard Profile vs. Low Profile
Standard-profile (f µLl-height : around 21.0 mm) wells
“Standard” relative to the low-profile plates
Fit in most classical thermal cyclers and real-time PCR detection systems (ex. Bio-Rad's iCycler®, iQ™ series real-time PCR detection systems, and Applied Biosystems' reg µLar PCR systems and DNA sequencers)
Allow large reaction volumes
Tubes reduce risk-splashing caused by cross-over contamination, minimizing the risk of well-to-well cross contamination
Low-profile (around 15.5 mm) wells
The newer design reduces the potential for condensate formation and offers advantages for light capture in fluorescence assays, low-volume reactions, and fast PCR
Recommended for newer instruments (ex. Bio-Rad's C1000 Touch™ and S1000™ thermal cyclers, CFX series real-time PCR detection systems, and Applied Biosystems' fast PCR systems)
Tubes reduce dead space and increase PCR efficiency
**Please cons µLt the manual of the PCR system, if necessary or ask us. Instruments with adjustable lids can usually use both standard-profile and low-profile wells. These instruments include Bio-Rad's 1000-series and DNA Engine® series thermal cyclers. **Some systems require standard profile or low-profile tubes only.

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 8-OHdG
Alias : 8-OHdG(8-Hydroxydeoxyguanosine)/8-oxo-DG/ 8-hydroxy?2 deoxyguanosine
Sensitivity : 0.281ng/ml
Range : 0.469-30ng/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area :

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 8-iso-PGF2?
Alias : 8-epi-PGF2?|8-Epi-Prostaglandin F2 Alpha|8-iso-PGF2?
Sensitivity : 9.375pg/ml
Range : 15.625-1000pg/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area :

40% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
Pack Volume-1 pipette.
Product Introduction
Pipette, also known as a pipette gun, is a device used for quantitative liquid handling. A pipette is generally used for small or micro pipetting of liquid when conducting studies for analytical testing.
Product Features
· 8-channel : 1-10 μL, 5-50 μL, 50-300 μL, 100-1000 μL ;
· Lightweight and Ergonomic design provides excellent operating, very suitable for gripping. Light spring, press very labor-saving, help to relieve fatigue of hand joints, easy suction.
· Digital display, adjusted delivery volume clearly indicated in the large digital display on the handle.
· F µLly made of high strength material, corrosion-resistant, comppatible to alcohol disinfection and UV sterilization;
· Well-compatible with most universal pipette tips on the market;
· Each pipette is pre-calibrated according to EN/ISO8655 standard, with strict quality control to ensure that each pipette is a high-quality product!
Note-O-ring may be a feature present in some of the models only.
Pipette Volume Ranges and Increments
Pipette Volume Range Increment
Muti- 8 channel P10
0.5-10µL
0.1 μL
Muti- 8 channel P50
5-50µL
0.5 μL
Muti- 8 channel P300
50-300µL
1 μL
Muti- 8 channel P1000 100-1000µL 5 μL

6×Protein Loading Buffer is especially form µLated for protein sample preparation to be used in SDS-PAGE. Prior to loading, add appropriate volume of 6×Protein Loading Buffer to protein sample to make its working concentration at 1×.

Storage
at -20℃ for two years

Shipping
Dry ice (-70℃)

Quantity : 5 x 1 mL tubes (5 mL total)
Gel Loading Buffer with Dye (6X) is a pre-mixed Loading Buffer with two tracking dye for agarose and non-denaturing poylacrylamide gel electrophoresis. EDTA is included to chelate magnesium (up to 10 mM) in enzymatic reactions, thereby stopping any ongoing reaction. Bromophenol blue and xylene cyanol are the standard tracking dye for electrophoresis.

Contents
Gel Loading Dye (6X) :

60 mM Tris-HCL（pH 8.0）
0.06% Bromophenol Blue
0.03% Xylene Cyanol
60% Glycerol
60 mM EDTA
Storage
Store at RT

Quality Assurance Statement
Gel Loading Dye(6X) is assayed for contaminating endonuclease, exonuclease and RNase activity.

Dye Migrate Rate (on a standard 1% TAE or TBE agarose gel)
Xylene Cyanol
TAE : 4160 bp
TBE : 3030 bp

Bromophenol Blue
TAE : 370 bp
TBE : 220 bp

Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : RPSA
GeneID : 3921
Uniprot : P08865
Specificity : 67kDa Laminin Receptor Antibody detects endogenous levels of total 67kDa Laminin Receptor.
Immunogen : A syntheVolumed peptide derived from human 67kDa Laminin Receptor, corresponding to a region within C-terminal amino acids.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat,Monkey
Prediction : Pig,Zebrafish,Bovine,Horse,Sheep,Rabbit,Dog,Chicken
Application : WB,IHC,ELISA(peptide)
Dilution : WB 1 : 1000-3000, IHC 1 : 50-1 : 200, ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2841179
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : DF7710-BP
Des# Blocking Peptide : 67kDa Laminin Receptor Blocking peptide
Blocking Peptide Price : $549 CAD

Volume 100 Bottles.
60ml transparent PP narrow mouth reagent bottle

DETAILS
6-well
Polystyrene
µLtra-low attachment surface
Flat bottom with lid
RNase-/DNase-free, Nonpyrogenic
Sterile
1 PLATE/BAG 20 BAGS/CASE