Volume : 100 µg
Purification : Immunogen affinity purified
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Rabbit
Clonality : polyclonal Ab
Clone ID :
Isotype : IgG
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background :
Immunogen : 5-hydroxytryptamine
Aliases :
Observed MW :
Uniprot ID :
Reactivity :
Application : ELISA, IHC
Recommended dilution : IHC : 1 : 50-1 : 500
Gene ID :
Research Area :

Volume : 96 Test
Species : Universal
Uniprot ID :
Short name : 5-HETE
Alias : 5-HETE
Sensitivity : 0.094ng/ml
Range : 0.156-10ng/ml
Detection method : Competitive ELISA, Coated with Antigen
Storage_tempeRature : 2-8 °C for 6 months
Research Area : Signal Transduction

Volume : 100 µg
Purification : Immunogen affinity purified
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Rabbit
Clonality : polyclonal Ab
Clone ID :
Isotype : IgG
Storage : PBS with 0.06% PC300 and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background :
Immunogen : KLH conj µgated 5-FAM
Aliases : 5-Carboxyfluorescein
Observed MW :
Uniprot ID :
Reactivity : FAM
Application : ELISA
Recommended dilution : 1 : 5000-1 : 10000
Gene ID :
Research Area :

Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : ALOX5
GeneID : 240
Uniprot : P09917
Specificity : 5 Lipoxygenase Antibody detects endogenous levels of total 5 Lipoxygenase.
Immunogen : A syntheVolumed peptide derived from human 5 Lipoxygenase, corresponding to a region within the internal amino acids.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat
Prediction : Pig,Bovine,Sheep,Rabbit,Dog
Application : WB,ELISA(peptide)
Dilution : WB 1 : 500-1 : 2000, ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2844704
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : AF4699-BP
Des# Blocking Peptide : 5 Lipoxygenase Blocking peptide
Blocking Peptide Price : $549 CAD

Volume : 100 µg
Purification : Protein A+G purification
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Mouse
Clonality : monoclonal
Clone ID : 6C4
Isotype : IgG2b
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Eukaryotic translation initiation factor 4E-binding protein 1(4EBP1), is a member of 4EBPs family, which reg µLate the translation of a subset of mRNA by competing with eIF4G for binding to eIF4E, thus preventing the assembly of the eIF4F complex. The eIF4F facilitates the recruitment of other translation initiation factors to form the complex and then initiates cap-dependent translation.4EBP1 also mediates the reg µLation of protein translation by growth factors, hormones and other stim µLi that signal thro µgh the MAP kinase and mTORC1 pathways. There are three forms of 4EBP1 alpha, beta and gamma.
Immunogen : eukaryotic translation initiation factor 4E binding protein 1
Aliases : 4E BP1 4EBP1 BP 1 eIF4E binding protein 1 EIF4EBP1 PHAS I
Observed MW : 12 kDa
Uniprot ID : Q13541
Reactivity : Human
Application : ELISA, WB, IF
Recommended dilution : WB : 1 : 500-1 : 2000; IF : 1 : 20-1 : 200
Gene ID : 1978
Research Area : Cancer, Metabolism

Volume : 100 µg
Purification : Protein A+G purification
Form : liquid
Purity : 95% as determined by SDS-PAGE
Host : Mouse
Clonality : monoclonal
Clone ID : 6C4
Isotype : IgG2b
Storage : PBS with 0.02% sodium azide and 50% glycerol pH 7.3,-20? for 12 months(Avoid repeated freeze / thaw cycles.)
Background : Eukaryotic translation initiation factor 4E-binding protein 1(4EBP1), is a member of 4EBPs family, which reg µLate the translation of a subset of mRNA by competing with eIF4G for binding to eIF4E, thus preventing the assembly of the eIF4F complex. The eIF4F facilitates the recruitment of other translation initiation factors to form the complex and then initiates cap-dependent translation.4EBP1 also mediates the reg µLation of protein translation by growth factors, hormones and other stim µLi that signal thro µgh the MAP kinase and mTORC1 pathways. There are three forms of 4EBP1 alpha, beta and gamma.
Immunogen : eukaryotic translation initiation factor 4E binding protein 1
Aliases : 4E BP1 4EBP1 BP 1 eIF4E binding protein 1 EIF4EBP1 PHAS I
Observed MW : 12 kDa
Uniprot ID : Q13541
Reactivity : Human
Application : ELISA, WB, IF
Recommended dilution : WB : 1 : 500-1 : 2000; IF : 1 : 20-1 : 200
Gene ID : 1978
Research Area : Cancer, Metabolism

Volume : 100 µL
Host : Rabbit
Clonality : polyclonal Ab
Isotype : IgG
GeneName : EIF4EBP1
GeneID : 1978
Uniprot : Q13541
Specificity : 4E-BP1 Antibody detects endogenous levels of total 4E-BP1.
Immunogen : A syntheVolumed peptide derived from human 4E-BP1.
Storage : Rabbit IgG in phosphate buffered saline , pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol.Store at -20 °C.Stable for 12 months from date of receipt.
Reactivity : Human,Mouse,Rat
Prediction :
Application : ELISA(peptide)
Dilution : ELISA(peptide) 1 : 20000-1 : 40000
Conj µgate : Unconj µgated
RRID : AB_2847325
An Introduction to Blocking Peptides : A superior strategy for validation of antibody binding is the use of blocking peptides. In a Western Blotting assay, our blocking peptide was validated to block the signal of this antibody. This ensures the site-specificity of an antibody, including phosphor-antibodies. In the case of the phosphor- antibodies, the antibodies can and will only recognize the phosphorylated target protein at the corresponding site, not the non-phosphorylated target protein or target protein phosphorylated at a different site.
Cat# Blocking Peptide : AF6601-BP
Des# Blocking Peptide : 4E-BP1 Blocking peptide
Blocking Peptide Price : $549 CAD

DETAILS
48-well
Polystyrene
µLtra-low attachment surface
Flat bottom with lid
RNase-/DNase-free, Nonpyrogenic
Sterile
1 PLATE/BAG 20 BAGS/CASE

30% OFF list price as part of our FALL Sale! On now until October 18th, 2024!
50 Plates Per Quantity
Cell c µLture plates have five types of well number : 6-wells, 12-wells, 24-wells, 24-wells and 96-wells
Flat surface of bottom in uniformity maximizes growth area for each well
Special design of chamfers and raised rims on wells mated rings on inner surface of lid lessen cross contamination among wells
Stacking ring on the lid stabilize plates when stacking m µLti- layers for saving space in laboratory
Compared with traditional plate, special design of anti-skid area on side face is easy for grip
The arrays of numerical code greatly help to identify each well for various medium and purposes
Feature
USP Plastic Class VI Polystyrene
6-well, 12-well, 24-well and 96-well are available **Please inquire about the 12, 24 and 96-well plates.
Suspension c µLture and adherent c µLture for choices
Number codes are for easy identification
RNase-free, DNase-free
Non-pyrogenic, non-toxic
SAL level 10 -6
Packaging
Lot number is printed on packaging for tracking
Plastic/paper packaging is easy to open
Cartons are customized for protecting products

This 4-way test tube rack is m µLtifunctional
Suitable for 0.5 ml, 1.5 ml, 2.0 ml, 5.0 ml, 10 ml, 15 ml, 50 ml centrif µge tubes
Pack of 5 or 10 units available for purchase
Dimensions : 17 x 14.9 x 8.9 cm
Polypropylene material

Tubes and caps are in strips of four and are in separate bags for ease of handling and labeling.
Specifications
Sterility
Non-sterile
Cap Type
Snap and Lock Pl µg Seal Flat Cap
Color
Clear
Volume (Metric)
0.1mL
Closure Material
Polypropylene
For Use With (Equipment)
Corbett™ Rotor-Gene™ system
Capacity (Metric)
0.1mL
Type
4-Strip PCR Tube And Flat Cap
Certifications/Compliance
RNase, DNase and pyrogen free
Material
Polypropylene
Format
Strip of 4 tubes
Shape
Conical